Assembly - Ironman Fitness Alpine Owner's Manual

Assembly

Getting Started - The Ironman Fitness Alpine Stepper will require some assembly. Unpack
the box in a clear area. Remove packing material. Do not dispose of packing material until
assembly is complete and unit is working properly. Place the unit on a clean level surface for
assembly. Make sure there is easy access to an electrical outlet. Before assembling, the unit
should be placed as close as possible to its final location. If you are missing any parts, please
call Ironman Fitness at 1-800-750-4766. Tools have been provided to assist with product
assembly.
Figure 1
Use tool
Figure 1
Step 1:
Attach the rear stabilizer (C) to main frame
(A) and secure using four washers (G3) and
four bolts (G4).
Slide console tube cover (A65) over console
tube.
Note: If the machine is not stable, adjust the
knob located on the end caps of the rear stabi-
lizer (C). Turning the knob towards the + sym-
bol will cause that side of the stabilizer to rise
up.
Use tool Figure 2
Figure 2
Do not tighten hardware until Figure 4
is completed.
Step 1:
Attach console tube (B) to main frame (A).
Connect upper console wire (B5) to lower
console wire (A20). Secure using five wash-
ers (G3) and five bolts (G4).
6