Table of Contents
Advertisement
noTe: Attaching AC power first, without rotating the alarm onto the mounting bracket, will result in a false
low battery trouble condition chirp (see Troubleshooting Guide). You need to activate the battery to elimi-
nate the low battery trouble condition chirps. Attach unit to mounting bracket very soon after applying AC
power to avoid false low battery notification.
noTe: The battery activation is a one-time feature. After activation, the battery cannot be turned off, and
can only be discharged at the end of unit life. If the alarm is removed from the mounting bracket, the backup
battery will remain active. See Permanently Disable Alarm / Discharge Battery section.
The alarm is now activated! After installation / activation, test your alarm as described in Operation and Testing
section.
wArnInG: FAIlUre To ProPerlY InSTAll And ACTIVATe THIS AlArM wIll PreVenT ProPer
oPerATIon oF THIS AlArM And wIll PreVenT ITS reSPonSe To FIre HAzArdS.
Interconnect Capability
This model has AC hardwire interconnect capability. When one hardwire interconnect unit sounds an alarm, all other
compatible hardwire interconnected units will also alarm. NOTE: AC wiring must be completed properly and the AC
quick connector must be attached to the unit for the hardwire interconnect function to work.
AC Hardwire Interconnect Model Compatibility
• The following models can be interconnected using the standard AC wiring interconnect: i12020,
i12020A, i12040, i12040A, i12060, i12060A, i12080, i12080A, i4618, i4618A, i4618AC, KN-SMFM-I,
RF-SM-ACDC, PE120, P12040, Pi2000, Pi2010, KN-COSM-I, KN-COSM-IB, KN-COSM-IBA, KN-COPE-I,
KN-COPE-IC, KN-COB-IC, KN-COP-IC, SL177i, SLED177i, HD135F, SM120X, CO120X, i12010S,
i12010SCO, P4010ACSCO, P4010ACSCO-W, P4010LACS-W, P4010ACS, P4010ACS-W, P4010ACLEDS,
P4010ACLEDS-2, P4010ACLEDSCO, P4010ACLEDSCO-2, 3050 -VAS10 -A, 3050-VASC10 -A,
P4010ACSCO-WF, P4010ACSCOAQ-WF.
noTe: Although this Wi-Fi model will hardwire interconnect with the models listed above, the Wi-Fi alarm will
ONLY transmit smoke and CO alarm signals from these alarms to your mobile device (after the wi-Fi alarm is
registered with the Kidde app). Other status notifications from non Wi-Fi alarms, such as low battery, end of
unit life, or a fault condition, will NOT be transmitted to your mobile device through the Wi-Fi alarm.
18
Advertisement
Table of Contents
