FoodSaver FM2100 Series Quick Start Manual

FM2100 SERIES QUICK START GUIDE
FoodSaver
MAKE A FOODSAVER
1. Open Appliance Lid
and place roll into Roll
Storage.
2. Lift up Roll Cutter Bar
and place bag material
beneath the cutter bar.
Pull out enough bag
material to hold item
being vacuum sealed, plus
3 inches (7.62 cm). Lower
the Roll Cutter Bar and
slide Bag Cutter across
Cutter Bar.
3. Move Easy Lock Latch to
the Open position. Open
Appliance Lid. Insert
one end of bag material
across Sealing Strip.
4. Close lid and turn Easy
Lock Latch to Operate
position.
5. Press Seal Button.
6. When Seal Indicator
Light turns off, sealing is
complete. Turn Latch to
Open position, lift lid and remove bag.
VACUUM SEAL FOODSAVER
ZIPPER BAGS:
(sold separately)
1. Prepare zipper bags
according to FoodSaver
Accessory Guidelines,
which are included with
accessory purchases. For
zipper bags, make sure
not to put any food under
the valve and press zipper
closed with finger while bag is lying down on a flat
surface.
2. Turn Latch to Operate position.
3. Insert one end of Accessory Hose into Accessory Port
on Appliance. Place Handheld Sealer on zipper bag
valve.
4. Press Vacuum & Seal Button.
Zipper bags are safe for pantry and fridge use only.
p. 1
FM2100_22EFSQSG1 (digital).indd 1 FM2100_22EFSQSG1 (digital).indd 1
Select Vacuum Sealer
®
HOW TO:
BAG:
®
Place Bag on Sealing Strip
Operate
Store
Open
C
lose and turn Easy Lock Latch to
Operate position
Press Seal Button
®
®
VACUUM SEAL A FOODSAVER
1. Place item(s) in bag,
allowing at least 3 inches
(7.62 cm) of space between
bag contents and top of
bag.
2. Open Appliance Lid and
place open end of bag into
Vacuum Channel (Drip Tray).
3. Close lid and turn Easy Lock
Latch to Operate position.
4. Press Vacuum & Seal Button
to begin vacuum and
sealing process. Motor will
continue to run until bag
is fully vacuumed, then will
automatically seal.
5. When Seal Indicator Light
turns off, turn Latch to Open
position, lift lid and remove
bag.
Refrigerate, freeze or store
as needed.
VACUUM SEAL FOODSAVER
CONTAINERS:
(sold separately)
1. Prepare FoodSaver Preserve
®
& Marinate Container
according to Guidelines,
which are included with
container purchase.
2. Turn Latch to Operate
position.
3. Insert one end of Accessory
Hose into Accessory Port on
Appliance. Place Handheld Sealer on container valve.
4. Press Vacuum & Seal Button.
To release vacuum and open, turn knob on lid to Open.
See Owner's Manual for full instructions and safeguards.
Français Español
p. 2 p. 3
BAG:
®
Place Bag in Vacuum Channel
Operate
Store
Open
Close and Latch Lid
Press Vacuum & Seal Button
®
2022/3/16 上午10:14 2022/3/16 上午10:14