Installation In The Nh-12 And In The Galaxy Nh-12; Installing An Optional Input Layer - Barco iCon H250 Installation Manual

3. INSTALLATION IN THE NH-12 AND IN THE GALAXY
NH-12
In the Galaxy NH-12 the DVI HDCP input board will be mounted in the free slot. In the NH-12 the DVI HDCP
input board can be mounted in one free slot or the other. The procedure is exactly analog for both free slots.
3.1

Installing an optional input layer

The procedure below describes how to install the optional input board in the top slot, but the procedure to
install it in the other free slot is equal.
Necessary tools
• Torx screwdriver T10
• Nut spanner 5 mm
How to install the optional input layer?
1. Remove the covers (see concerning chapters)
- rear cover
- front cover
2. If there is a blank cover plate present, remove it by unscrewing both fixing screws
Image 3-1
Optional input layer: fixing screws of the blank cover plate
R59770246 DVI HDCP INPUT KIT 28/04/2008

3. Installation in the NH-12 and in the Galaxy NH-12

Image 3-2
Optional input layer: fixing screws of the blank cover plate
9