Remote Keyless Entry (Rke) System; Operation - Chevrolet Bolt EUV 2022 Owner's Manual

The key that is part of the Remote Keyless
Entry (RKE) transmitter can be used for all
locks.
To remove the key, press the button near
the bottom of the transmitter, and pull the
key out. Never pull the key out without
pressing the button.
If it becomes difficult to turn the key,
inspect the key blade for debris. Periodically,
clean the key with a brush or a pick.
See your dealer if a new key is needed.
If locked out of the vehicle, see Roadside
Assistance Program 0 311.
With an active OnStar or connected service
plan, an OnStar Advisor may remotely
unlock the vehicle. See OnStar Overview
0 319.
Remote Keyless Entry (RKE)
System
See Radio Frequency Statement 0 316.
If there is a decrease in the Remote Keyless
Entry (RKE) operating range:
Check the distance. The transmitter may
.
be too far from the vehicle.
Check the location. Other vehicles or
.
objects may be blocking the signal.
Check the transmitter's battery. See
.
"Battery Replacement" later in this
section.
Keys, Doors, and Windows
If the transmitter is still not working
.
correctly, see your dealer or a qualified
technician for service.
Remote Keyless Entry (RKE)
System Operation
The Keyless Access system allows for vehicle
entry when the Remote Keyless Entry (RKE)
transmitter is within 1 m (3 ft). See "Keyless
Access Operation" following.
The transmitter functions may work up to
60 m (197 ft) away from the vehicle.
Other conditions can impact the
performance of the transmitter. See Remote
Keyless Entry (RKE) System 0 7.
7