Chevrolet Bolt EUV 2022 Owner's Manual page 238

{
Warning
When using electric products, basic
precautions should always be followed,
including the following:
Read all the safety warnings and
.
instructions before using this product.
Failure to follow the warnings and the
instructions may result in electric
shock, fire, and/or serious injury.
Never leave children unattended near
.
the vehicle while the vehicle is
charging and never allow children to
play with the charge cord.
If the plug provided does not fit the
.
electrical outlet, do not modify the
plug. Arrange for a qualified electrician
to inspect the electrical outlet.
Do not put fingers into the electric
.
vehicle connector.
{
Warning
To reduce the risk of fire, installations
.
shall comply with the requirements of
National Electric Code, ANSI/NFPA 70
(USA), Canadian Electrical Code CSA
Warning (Continued)
22.1 and IEC 60364 – Electrical
installations in buildings, depending on
the region in which the unit is being
installed. The installer shall comply
with any additional local requirements
mandated by the country and/or
municipality.
Do not use this product if the flexible
.
power cord or the electric vehicle cable
is frayed, has broken insulation,
or shows any other signs of damage.
For Canada only: Not for use in
.
commercial garages.
Do not use this product if the
.
enclosure or the vehicle plug is
broken, cracked, open, or shows any
other indication of damage.
The plug must be plugged into an
.
appropriate electrical outlet that is
properly installed in accordance with
all local codes and ordinances. Do not
modify the plug provided with the
product. If the plug does not fit the
electrical outlet, have a proper
electrical outlet installed by a qualified
electrician. If ground is missing, the
(Continued)
Driving and Operating
Warning (Continued)
charge cord indicators will indicate an
electrical system fault and the vehicle
may not charge.
Charge Cord Status Indicators
Refer to the instructions that come with the
dual level charge cord. Do not lose these
instruction.
Grounding Instructions
The charge circuit must be grounded. If this
charge circuit should malfunction or break
down, grounding provides a path of least
resistance for electric current to reduce the
risk of electric shock. This product is
equipped with a cord that has an equipment
grounding conductor and a grounding plug.
The plug must be plugged into an
appropriate outlet that is properly installed
and grounded in accordance with all local
codes and ordinances.
(Continued)
237