Hyundai H-CMD7075 Instruction Manual page 19

Loading/ eject a disc
Turn the power on.
Insert the disc with the printed side facing upward into the slot.
Press EJECT button on the panel to eject the disc.
Inserting the SD/ MMC card/ USB device
Insert the MMC/ SD card or USB device into MMC/ SD compartment or USB socket. Then the playing mode will be changed into
MMC/ SD or USB mode automatically.
The first card/ USB device track playback will start.
Note: When MMC/ SD card and USB device are both inserted into their compartment or socket, the playing mode will be changed
into the mode of the later one.
Playing/ pausing
When the disc has been already loaded press the PLAY/PAUSE button on the RC to start playback.
To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
Press and hold for 2 seconds the SET/PAU button on the panel or press shortly the PLAY/PAUSE on the RC to pause the
playback. Press again to resume the playback.
Stop playback
During playback press the STOP button to stop playback.
Playing the previous/ next track
During playback press the
Press the button on the RC or rotate the TUN TRK knob on the panel clockwise to play the next track.
Scanning forward and backward
Press and hold the or
forward direction.
Release the button/knob when the desired location is found.
button on the RC or rotate the TUN TRK knob on the panel anticlockwise to play the previous track.
button on the RC or rotate and hold the TUN TRK knob on the panel to fast the playing in backward or
19