Using Your Radio - Cobra microTALK FRS132 Owner's Manual

Hide thumbs Also See for microTALK FRS132:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com

Using Your Radio

Operation
Turning On Your microTALK
On/Off Power
1. Press and hold the Power button for two
Your microTALK
ready to receive transmissions. The radio is
always in Standby Mode except when the Talk
or Call buttons are pressed.
Battery Low
Battery Low
When battery power is low, the Battery Low
icon will blink. Your batteries should be replaced
or recharged, if using rechargeable batteries.
Battery/Power Saver
Your microTALK
designed to extend battery life. If there are no
transmissions within ten (10) seconds, the radio
will automatically switch to Battery Save Mode.
This will not affect the radio's ability to receive
incoming transmissions.
Talking to Another Person
Talk Button
1. Press and hold the Talk button.
2. With the microphone about two (2) inches (5cm)
3. Release the Talk button when you are
2" From Mouth
You cannot receive incoming calls while
pressing the Talk button.
English
5
(2) seconds. A series of audible tones will
indicate the radio is On.
®
radio is now in Standby Mode,
®
radio has a unique circuit
from your mouth, speak in a normal voice.
finished talking and listen for a response.
Both radios must be tuned to
the same channel to communicate.
®
Radio

Advertisement

Table of Contents
loading

Table of Contents