Positioning - Electrolux EWT1074M5WA User Manual

5. Open the lid. Remove the polystyrene
piece from top panel and all the items
from the washing tub.
6. Install polystyrene piece to the top
panel again.
Important: The top polystyrene
must be removed LAST, for
protecting the washing tub from
hiting the cabinet when the
machine is tilted.
7. Lie down the washing machine on its
back side, taking care not to damage
cabinet by placing two of the corner
packing pieces between the machine
and the floor. (as shown in the
picture).
Fasten the Screw (you can find screw
in the user manual bag) of the Bottom
Cover to the bottom rear frame of the
cabinet to secure its position.
8. Pull up the appliance in vertical
position.
Open the washing
machine lid.
Remove the top
polystyrene.

10.2 Positioning

It is important that your washing machine
stands firm and level on the floor to
ensure correct operation.
Use a spirit level on the front and side
panels of the washing machine to check
the levels. The spirit level should be used
close to the corners of the washing
machine for accuracy. By hand, or using
a spanner if necessary, the left front leg is
adjustable and the other legs are factory
fitted in a fixed position (Unadjustable
legs have a round base).
ENGLISH 35