Electrolux EWT1074M5WA User Manual page 15

Top-load washing machine
Hide thumbs Also See for EWT1074M5WA:
Table of Contents

Advertisement

Spin Button
Press this button to select the spin speed
or no spin, if you want your laundry to be
spun at a speed different from the one
proposed by the washing machine.
The speed of spin levels are:
– High, about 700 rpm ;
– Mid, about 650 rpm ;
– Low, about 550 rpm ;
– No Spin, 0 rpm.
Delay End (
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum of 1 hour
to maximum of 20 hours.
Press the Delay End button to choose
the end time as you wish. The display
shows the number of hours.
This option must be selected after
choosing the wash program, and
before pressing the "Start/Pause"
button.
For example, if the program duration of
your selected program is 3.20 hours and
you define the "Delay End" time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
2.40 hrs.
Countdown
Pressed
Start/Pause
After selecting Delay End time, press
Start/Pause button to start the program.
Machine will then countdown and update
time on the display every hours until it
reaches the starting point of the wash
cycle.
) Button
: 6 hrs.
3.20 hrs.
Program Cycle
Start the
End of
Program
Cycle
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
-
set the washing machine to PAUSE by
pressing "Start/Pause" button;
-
deselect this option by pressing
"Delay End" button repeatedly till
the display shows delay time "
press the "Start/Pause" to start the
-
program.
Start/Pause Button
To start the selected program, press
the "Start/Pause" button.
If you have started your wash and you
wish to stop it for some reason, press
the "Start/Pause" button to enter
PAUSE mode
To restart the program from the point at
which it was interrupted, press the
"Start/Pause" again.
If the lid is opened during
operation, the machine will go
into PAUSE mode and display
show "
".
After closing the lid press
Start/Pause button on the control
panel to restart the program.
ENGLISH
15
";

Advertisement

Table of Contents
loading

Table of Contents