Table of Contents
Advertisement
VEC-104 & 105 Essentials UG V1.0.qxd:User guide
---
Maintenance
Clearing blockages
!
!
WARNING: To reduce the risk of electric shock, the power cord must be disconnected from the mains
!
!
supply before performing maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug
from the electrical socket
Hose blockages
The flexible hose should be disconnected from the
vacuum cleaner. Carefully remove any blockages found
and reconnect the hose securely.
Clearing debris from the TurboTool
NOTE: Switch the cleaner off and disconnect the power plug from the electrical outlet before performing this
check.
Turn the TurboTool over and
slide off the locking ring.
6
All manuals and user guides at all-guides.com
(Keep your Vax as good as new)
remove
locking ring
Detach lower housing and
remove blockage.
2/9/11
16:03
Accessory blockages
Remove accessory from the hose/handle tube.
Carefully remove the blockage and return to the cleaner.
(some models only)
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing
closed. Slip the locking ring over
the neck of the TurboTool and into
the groove to finish.
Vax Careline: (UK) 0844 412 8455
Page 6
replace
locking
ring
(ROI) 1-800 928 308
Advertisement
Table of Contents
