Carrier Miracool Owner's Manual page 13

Glass door merchandiser, size 2000l
Table of Contents

Advertisement

TASK
Routine Cleaning
Stubborn Spots and Stains,
Caked-on Splatter, and other
Light Discolorations
Heat Ting or Heavy
Discoloration
Caked-on Foods and Grease,
Fatty Acids Milkstone (where
swabbing or rubbing is not
practical)
Hard Water Spots and Scale
*Use of brand names is intended only to indicate a type of
cleaner and does not constitute an endorsement; nor does the
omission of any brand name cleaner imply its inadequacy.
Many products named are regional in distribution and can be
found in local supermarkets, department and hardware stores.
All products should be used in strict accordance with
instructions on package.
TABLE 4 –METHODS FOR CLEANING STAINLESS STEEL
CLEANING AGENT*
Soap, ammonia or detergent
and water
Revere Ware, Goddard's,
Twinkle or Cameo stainless
steel cleaner or Soft Scrub
cleaner.
Household cleansers, such as
Old Dutch, Bon Ami, Ajax,
Comet.
Revere Ware, Goddard's,
Twinkle or Cameo stainless
steel cleaner.
Easy-Off oven cleaner.
Vinegar.
METHOD OF APPLICATION
Sponge with cloth, then rinse
with clear water and wipe dry.
Apply with a damp sponge or
cloth. Rub with a damp cloth.
Rub with a damp cloth. May
contain chlorine bleachers.
Rinse thoroughly after use.
Apply with damp sponge or
cloth.
Apply generous coating. Allow
to stand for 10 to 15 minutes.
Rinse. Repeated application
may be necessary.
Swab or wipe with cloth. Rinse
with water and dry.
NOTES:
1.
Use the mildest cleaning procedure that will do the job
efficiently and effectively.
2.
Always rub in the direction of the polish lines for
maximum effectiveness and to avoid marring the surface.
3.
Use only a soft cloth, sponge, fiberous brushes, plastic or
stainless steel pads for cleaning and scouring.
4.
Rinse thoroughly with fresh water after every cleaning
operation.
5.
Always wipe dry to avoid water marks.
6.
Never use common steel wood pads; these will cause
rust.
13
EFFECT ON FINISH
Satisfactory for use on all
finishes.
Satisfactory for use on all
finishes if rubbing is light. Use
in direction of polish lines.
Use in direction of polish lines.
May scratch or dull highly
polished finishes.
Use in direction of polish lines.
May scratch or dull highly
polished finishes.
Excellent removal. Satisfactory
for use on all finishes.
Satisfactory for use on all
finishes.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Miracool mc2000hMiracool mc2000s

Table of Contents