Completing Your Installation With Or Without A Bowl Light Fixture - Hunter 45006-0109 Installation And Operation Manual

7 • Completing Your Installation With or Without a Bowl Light Fixture 7 • Completing Your Installation With or Without a Bowl Light Fixture
Installing the Glass Bowl
7-1. If you want to install the light fixture,
proceed with Step 7-2 now.
If you do not want to install the light
fixture, you need to uninstall it now. See
"Uninstalling the Light Fixture" in Step
7-7. Once you have uninstalled the light
fixture, continue with step 7-2.
7-2. Attach the extra pull chain (included)
to the fan pull chain using the plastic
breakaway connector. (You may find the
plastic breakaway connector on the end
of the extra chain.)
7-3. Feed the fan and light pull chains as
shown in Step 7-3 illustration.
7-4. Install the Pin Base CFL (26 Watt
Maximum) into the socket.
7-5. Place the cover plate up against the glass
bowl. Align the holes in the cover plate
with the grommet hole of the metal disk.
7-6. Screw the finial onto the threaded rod end
until tight.
Go to 8 • Operating and Cleaning the Fan.
Breakaway
Connector
Step 7-3
Fan
Pull Chain
Grommet Hole
(Metal Disk)
Fan
Pull Chain
Hole (Cover Plate)
11
45006-01 • 09/26/07 • Hunter Fan Company
Light Bulb
(Pin Base CFL)
Light
Pull Chain
Light
Pull Chain
Finial