Advertisement
8.9
DS tool set, item no 258393/8
– The tool set contains all the tools necessary for installing and mount-
ing the saw and includes safety-relevant parts, fastening screws,
nuts etc.
– Use of the Hilti tool set ensures that the equipment can be operated
correctly and safely.
– All tools and parts contained in this set, and their functions and item
nos. for reordering, are described in the manual, item no. 258304/5,
which is included with the set.
8.10 Connecting and operating the DS-TS 30
– Two PH 34 hoses and one FH 14 hose set are used to connect the
saw head to the hydraulic unit.
– All functions can be controlled only by way of the DS-CB 3 / CB 4
electric remote control unit.
– The hydraulic hoses and remote control cable have a standard length
of 10 metres.
– This length can be extended, but a drop in performance must then be
expected.
– If required, the PH 34 pressure gauge adapter, item no. 310653, can
be fitted at the pressure feed hose.
8.11 Using other hydraulic units to power the DS-TS 30 saw
– Damage to the DS-TS 30 resulting from use of a hydraulic unit other
than the D-LP 30 (LP 20) or D-HP 20 to power the system is not cov-
ered by the warranty provided by the Hilti Corporation.
– If you decide to operate the saw, at your own risk, with a hydraulic
unit of a type not specified by Hilti, the hydraulic unit used must ful-
fil the following conditions:
I Oil flow rate 50–100 l/min.
I Maximum operating pressure 210 bar
I Modifications to the DS-TS 30 hydraulic couplings are NOT permitted.
– The user carries the responsibility for ensuring that the control system employed functions correctly.
– The Hilti D-RC 30 remote control unit, item no. 312891/5, may be used. (The stand for this unit is the D-RS15,
item no. 221269/4.)
PH 34
pressure gauge adapter
Professional toolbox
2x DS-PH 34-10
PH 34 gauge
1x DS-FH 4/14-10
D-RC30
PH 34 Mano
2x D-PH 34-10
PH 3/4"
(with gauge)
PH 3/4" return
1x DS-FH
(without gauge)
4/14-10
1x D-WH-11
D-RS 15
17
Advertisement
