Assembling The Blades - Hunter 42775-01 Installation And Operation Manual

6-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly
screws. If you used grommets, the blades may appear slightly
loose after screws are tightened. This is normal.
6-3. Loosen the blade iron armature screws that are holding the
shipping bumpers in place. Push the shipping bumpers in, then
lift them off.
6-4. Slide the blade irons onto the blade iron armature screws.
Tighten the blade iron armature screws as tight as possible with a
screwdriver.
6 • Assembling the Blades
Shipping
Bumper
Blade Iron
Armature Screws
Step 6-3
42775-01 • 04/29/08 • Hunter Fan Company
Blade Iron
Armature
Screw (tighten
securely)
Blade
Iron
10
Step 6-1
Grommet
Blade Assembly
Screw
Steps 6-1 – 6-2
Blade Assembly
Screw
Grommet
Blade