Hunter 42753-01 Owner's Manual And Installation Manual page 15

9 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Uninstalling the Light Fixture
9-11. To uninstall the light fixture, first disconnect the plug connectors
between the black wire and the black/white wire.
9-12. Disconnect the plug connectors between the two white
wires.
9-13. Uninstall the connector and washer from the end of the
light fixture inside the lower switch housing.
9-14. Unscrew the threaded rod of the light fixture from the lower
switch housing.
9-15. Remove the light fixture from the lower switch housing
pulling disconnected wires through the hole in the center of
the lower switch housing.
Note: When removing the wires, pull the thin plug
connector (male) through first, and then pull the other plug
connector (female) through the hole.
9-16. Install the dummy terminals (included in the sack parts) on
the two disconnected wires in the lower switch housing.
9-17. Install the switch housing cap and plug button to the lower
switch housing.
9-18. Once you have uninstalled the light fixture, continue
with step 9-6.
Male Dummy
Female Dummy
Terminal
Terminal
15
42753-01 • 09/12/30 • Hunter Fan Company
Threaded Rod
Steps 9-13 – 9-15
Cap
Plug Button
Lower Switch
Housing
Step 9-17