Table of Contents
Advertisement
Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
6-1.
Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2.
Attach each blade to a blade iron using three blade assembly
screws. If you used grommets, the blades may appear slightly
loose after screws are tightened. This is normal.
6-3.
Remove the blade mounting screws and rubber shipping
bumpers from the motor. Note: Some blade mounting screws
are installed in the motor to secure shipping blocks.
6-4.
For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
Note: The blades on this fan have been treated with Hunter's Dust
Armor protection, making the blades less likely
to attract dust and dirt. Use a dry or slightly
damp lint free cloth to clean the blades. Do
not use a furniture polish or any other cleaners
that leave any residue, as they will damage the
protective Dust Armor on the blades.
Use with grommet
Use without grommet
6 • Assembling the Blades
Blade Assembly
Step 6-4
Screws
Blade
Mounting
Screw
42653-01 • 02/04/10 • Hunter Fan Company
Step 6-1 (Detail)
Grommet
9
Steps 6-1 – 6-2
Advertisement
Table of Contents
