Hunter 42650-01 Owner's Manual And Installation Manual page 13

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Uninstalling the Light Fixture
7-14. Remove the lower switch housing screws, then remove the lower
switch housing.
7-15. To uninstall the light fixture, first disconnect the 9-pin plug
connectors between the black wire and the black/white wire.
7-16. Disconnect the plug connectors between the two white wires.
7-17. Uninstall the nut and washer from the end of the light fixture
inside the lower switch housing.
7-18. Unscrew the threaded rod of the light fixture from the lower
switch housing.
7-19. Remove the light fixture from the lower switch housing pulling
disconnected wires through the hole in the center of the lower
switch housing.
Note: When removing the wires, pull the thin plug connector
(male) through first, and then pull the other plug connector
(female) through the hole.
7-20. Install the switch housing cap and plug button to the lower switch
housing.
7-21. Once you have uninstalled the light fixture, continue with step
7-6.
7-22. Re-attach the lower switch housing back to the fan and reinstall
the lower switch housing screws.
13
42650-01 • 08/17/09 • Hunter Fan Company
Steps 7-14 – 7-19
Cap
Plug Button
Lower Switch
Housing
Lower Switch
Housing
Screw
Threaded Rod
Step 7-20