Fan - Hunter 42650-01 Owner's Manual And Installation Manual

7 • Completing Your Installation With or Without a Bowl Light Fixture
Installing the Glass Bowl
7-8. If you want to install the light fixture,
proceed with Step 7-9 now.
If you do not want to install the light
fixture, you need to uninstall it now. See
"Uninstalling the Light Fixture" in Step
7-14. Once you have uninstalled the light
fixture, continue with step 7-6.
7-9. Attach the extra pull chain (included)
to the fan pull chain using the plastic
breakaway connector. (You may find the
plastic breakaway connector on the end
of the extra chain.)
7-10. Feed the fan and light pull chains as
shown in Step 7-10 illustration.
7-11. Install the Pin Base CFL (26 Watt
Maximum) into the socket.
7-12. Place the cover plate up against the glass
bowl. Align the holes in the cover plate
with the grommet hole of the metal disk.
7-13. Screw the finial onto the threaded rod end
until tight.
Breakaway
Connector
Step 7-10

Fan

Pull Chain
Grommet Hole
(Metal Disk)
Fan
Pull Chain
Hole (Cover Plate)
12
42650-01 • 08/17/09 • Hunter Fan Company
Light Bulb
(Pin Base CFL)
Light
Pull Chain
Light
Pull Chain
Finial