Full HD 1080p Driving Recorder
2.3 Connecting to Power
Use only the attached car power adaptor for activating the device and
charging the built-in battery.
1. Connect one end of power connector to USB port on the device.
2. Plug the other end of the power adapter to the cigarette lighter
socket of your vehicle. Once the vehicle engine is started, the device
automatically turns on.
2.4 Powering the Device On / Off
2.4.1 Auto Power On / Off
Once the vehicle engine is started, the device automatically turns on
and recording (must have SD Card). After the car engine stopped, the
device will automatically save the last recorded file and shutdown.
2.4.2 Manual Power On / Off and Reset
2.4.2.1 Manual Power On / off
Press Power button
to turn it on.
To power off the device press the Power
button with 3 seconds.
EN-7
2.4.2.2 Reset the Device
In case the device fails to function normally
due to unknown causes, press the reset
,then press power button
button
restart the device.
2.5 Set the Date / Time
To set the correct date and time, press Menu button
menu setting, then press Menu button
, then press Up / Down button
Setup
press REC button
REC
to enter date / time setting, then press Up /
Down button
to adjust the value, press REC button
next setting, after finished all the settings, press Menu button
to exit from menu setting.
2.6 Mode Selection
The default setting is Video Mode
switch to Still Capture Mode
, and Playback Mode
3 Using the Driving Recorder
3.1 Recording Videos
Before starting recording, please insert a SD card into the TF card slot.
REC
Press REC button
to start recording, the video recording icon
flashes on the screen. The recorded files are saved on the TF card. To
REC
stop recording, press REC button
With car power adaptor connected the device will automatically turn on
and start recording when the car engine starts. When the engine stops,
the device will automatically save the last file and turn off.
EN-8
Full HD 1080p Driving Recorder
to
to enter the
change to General Settings
to select
Date/Time
,
REC
switch to
twice
, Press Mode button
can
MODE
.
again.