Polaroid · DS231GSW
2.3 Connecting to Power
Use only the attached car power adaptor for activating the device and charging
the built-in battery.
1. Connect one end of power connector to USB port on the device.
2. Plug the other end of the power adapter to the cigarette lighter socket of
your vehicle. Once the vehicle engine is started, the device automatically
turns on.
2.4 Powering the Device On / Off
2.4.1 Auto Power On / Off
Once the vehicle engine is started, the device automatically turns on and
recording (must have SD Card). After the car engine stopped, the device will
automatically save the last recorded file and shutdown.
2.4.2 Manual Power On / Off and Reset
2.4.2.1 Manual Power On / off
Press Power button
to turn it on. To
power off the device press the Power
button
with 3 seconds.
EN-7
Polaroid · D
2.4.2.2 Reset the Device
In case the device fails to function normally
due to unknown causes, press the Power
button
with 10sec to restart the device.
2.5 Set the Date / Time
To set the correct date and time, press Menu button
setting, then press Menu button
change to General Settings Menu
then press Up / Down button
to select Clock settings, press REC button
to enter date / time setting, then press Up / Down button
adjust the value, press REC button
switch to next setting, after finished
all the settings, press REC button
to back General Settings Option, press
Menu button
to exit from menu setting.
2.6 Mode Selection
The default setting is Video Mode
, Long press Menu button
switch to Still Capture Mode
, Video Playing Mode
viewing Mode
.
3 Using the Driving Recorder
3.1 Recording Videos
Before starting recording, please insert a SD card into the TF card slot. Press
REC button
to start recording, the video recording icon
the screen. The recorded files are saved on the TF card. To stop recording,
press REC button
again.
With car power adaptor connected the device will automatically turn on and
start recording when the car engine starts. When the engine stops, the device
will automatically save the last file and turn off.
EN-8
to enter the menu
,
to
can
, Picture
flashes on