Connecting To Power; Powering The Device On / Off; Auto Power On / Off; Manual Power On / Off And Reset - Polaroid N302 User Manual

Polaroid·N302

2.3 Connecting to Power

Use only the attached car power adaptor for activating the device and charging
the built-in battery.
1. Connect one end of power connector to USB port on the device.
2. Plug the other end of the power adapter to the cigarette lighter socket of
your vehicle. Once the vehicle engine is started, the device automatically
turns on.

2.4 Powering the Device On / Off

2.4.1 Auto Power On / Off

Once the vehicle engine is started, the device automatically turns on and
recording (must have SD Card). After the car engine stopped, the device will
automatically save the last recorded file and shutdown.

2.4.2 Manual Power On / Off and Reset

2.4.2.1 Manual Power On / off

Short Press Power button to power on/off.
EN-7

2.4.2.2 Reset the Device

In case the device fails to function normally
due to unknown causes, press the reset
，then press power button
button
restart the device.

2.5 Set the Date / Time

To set the correct date and time, press Menu button
setting, then press Menu button
then press Up / Down button to select Clock settings, press REC
button to enter date / time setting, then press Up / Down button
to adjust the value, press REC button
finished all the settings, press Menu button

2.6 Mode Selection

The default setting is Video Mode
to Still Capture Mode , and Playback Mode

2.7 Five Seconds's color mode

When recording in night vision mode, car's number plate in the front may be
strong light reflection. Press the MODE button, the device will turn to normal
recording and last for 5 seconds only. After that, will turn back to night vision
mode.

3 Using the Driving Recorder

3.1 Recording Videos

Before starting recording, please insert a SD card into the TF card slot. Press
REC button to start recording, the video recording icon
the screen. The recorded files are saved on the TF card. To stop recording,
press REC button again.
With car power adaptor connected the device will automatically turn on and
Polaroid·N302
to
to enter the menu
change to General Settings Menu
switch to next setting, after
to exit from menu setting.
, Press Mode button can switch
.
flashes on
EN-8
,