Toro Groundsmaster 4500-D Installation Instructions Manual page 4

Installing the Hydraulic
Components
Installing the Flow-divider
Manifold
1. Align the holes in the flow-divider manifold with
the holes in the chassis bracket.
Note:
Ensure that the 45° fitting is pointing
down and toward the back of the machine.
1. Bolt
2. Flow-divider manifold
3. Chassis bracket
2. Secure the flow-divider manifold to the chassis
bracket with the 2 bolts and 2 flange nuts.
Figure 3
4. Flange nuts
5. Up
6. Forward
Installing the Rear-traction Tube
and the Pressure Hose
1. Align the forward tube nut for the rear-traction
tube with the elbow fitting in the flow divider
(Figure 4
g021286
1. Traction-motor tube
2. Divider tube
3. Hydraulic-filter tube
4. Rear-traction manifold
5. Cross-manifold tube
6. Pressure hose
2. Thread the forward tube nut onto the elbow, and
tighten the nut to 51 to 63 N⋅m (37 to 47 ft-lb).
4
and Figure 5).
Figure 4
7. Hydraulic pump
8. Rear-traction tube
9. Flow divider
10. Traction motor
11. Forward
g021294