Download Print this page

How To Change Color Panels - Hotpoint HDA400 Use And Care Manual

Build-in dishwashers
Hide thumbs Also See for HDA400:

Advertisement

HOW TO CHANGE COLOR PANELS

If you are redecorating, you can change your dishwasher's front panel to
match or blend with your new colors by flipping it over. Each side of each
panel is a different color. You may also paint a panel with a color of your
own choice.
How to Change the Door Panel:
Take out trim screws on either side of the
1.
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful-edges may be sharp.)
Turn the door panel around and put the color you
3.
want in front.
4. Replace the door panel, side trim and screws.
How to Change the Lower Panel:
I
Wood Panel ~m Wts
contain trim and
Wood panel trim kifi
instructions for adding a decorative wood door
panel and lower access panel no thicker than 1/4"
to match kitchen cabinets.
Specify the trim color of your choice from the
following options:
Remove the bottom panel attachment screws.
1.
2. On models without top mounting screws, remove
the entire access assembly by lifting it up and over
the retaining tabs.
3. On models with top mounting screws, remove
the screws.
4. Take out the top trim screws and remove the
top trim.
5. Slide the color panel(s) up and out and put the
color you want in front.
6. Replace the top trim and screws.
7. Replace the entire access assembly by reversing
the steps.
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.

Advertisement

loading

This manual is also suitable for:

Hda430