How To Change Color Panels - Hotpoint HDA969 Use And Care Manual

How to change color panels

If you are redecorating, you can
change your dishwasher's front
panels to match or blend with your
new colors.
The panels are held in place by the
door trim and the trim on the panel
below the door. Each side of ~ach
panel is a different color. Or you
can paint a panel with the color of
your own choice.
Do not operate the dishwasher
while changing panels or when
lower access panel is removed.
How to change the door panel:
1. Take out trim screws on either
side of the dishwasher door.
Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and
put the color you want in front.
4. Replace the door panel, side
trim and screws.
How to change the lower panel:
1. Remove panel attachment screws
2. Remove the entire panel.
3. Take out screws and remove the
top trim.
4. Slide the door panel out.
5. Turn the panel around and put
the color you want in front.
6. Replace the lower panel, top
trim and screws.
7. Replace the entire panel and
attachment screws.
15
Note: Other color panels are
available for your dishwasher.
Check the color you want on the
order form below and mail it to us.
Wood panel trim kit GPF 40
contains trim and instructions for
adding a decorative wood door
panel and lower access panel to
match kitchen cabinets. Use the
order form below to order this kit.
ORDER FORM
Use this form to order, without charge, your choice of
a color panel not supplied with your dishwasher
a wood panel trim kit.
Please mark only one box.
White/Almond
Name:
Address:
City:
State:
Model No.:
Date Purchased:
Kit GPF 40
FOLD HERE
Zip Code:
Serial No.:
or