Advertisement
!§ DC IN connector (4-pin)
Connects to a DC power source (10.5 to 17 V) when
using the HDC-700A as a stand-alone unit.
!¶ AC OUT connector
Supplies AC power (100 VA maximum).
!• VTR connector (26-pin)
Connects the HDC-700A to a VTR or to the HDCD-50
using an HDCZ cable.
!ª SERIAL OUT connector
A serial digital interface with a transfer speed of
1.5 Gb/s, this connector may be used to output a video
signal to a monitor or VTR.
@º TRUNK LINE connector (D-sub 9-pin, RS-
232C)
This connector is an RS-232C interface, and is used to
connect the camera to the HDCU-700A Camera
Control Unit TRUNK LINE connector (D-sub 9-pin).
Its main purpose is to allow devices used on the
camera to be controlled from the HDCU-700A.
7(E)
Advertisement
