Table of Contents
Advertisement
Available languages
Available languages
5. Remove the protective caps covering the antenna ports on the AP, if any. Next, connect the 2 antennas
marked "2.4 GHz" to the designated 2.4 GHz connectors and the antennas marked "5 GHz" to the
designated 5 GHz connectors on the AP. The DWL-8710AP is now ready to be connected to the network.
Mounting the AP to a Pole
The DWL-8710AP can be mounted either horizontally or vertically. However, it is recommended that the AP
is installed with the antennas positioned vertically in order to achieve optimal performance.
1. Place the lock and flat washer on the cap screws and attach the mounting plate to the back of the
DWL-8710AP.
Advertisement
Table of Contents
