D-Link DWL-8710AP Quick Installation Manual page 7

802.11n/ac unified wireless outdoor poe access point

Hide thumbs Also See for DWL-8710AP:

Table of Contents

Available languages

Protecting the Network Ports

The DWL-8710AP's Ethernet ports are equipped with a set of protective sealing caps designed for outdoor

use. Please refer to figure 8 for how to correctly attach and secure the Ethernet cables to the DWL-8710AP.

Mounting the AP to a Wall

The DWL-8710AP can be mounted either horizontally or vertically. However, it is recommended that the AP

is installed with the antennas positioned vertically in order to achieve optimal performance.

1. Use the mounting base plate to mark the location on the surface where you want to mount the

DWL-8710AP. Next, drill a hole of 8 mm wide and 37 mm deep on all 4 markings.

2. Remove the nut and washer from the bolts and place the bolts in the holes as shown below in figure 9.

Table of Contents