Table of Contents
Advertisement
A D J U S T M E N T S , S E R V I C I N G & R E P L A C I N G C O M P O N E N T S
DR AWER AD JUS TMENT
Drawer front bracket and skin bracket screw holes are
slotted to assist with drawer adjustment. See figs. 1-4.
P R O CEDUR E
1. Loosen the drawer front bracket screws. See fig. 1.
2. Adjust the drawer front as needed. See fig. 2.
3. Tighten the drawer front bracket screws.
4. Verify drawer alignment. If more alignment is
needed, continue to steps 5 and 6.
5. Loosen the screws securing the drawer skin to the
drawer skin bracket. See fig. 3.
NO T E: IF A P P L IC A BL E , R EMO V E A N Y
D R AW ER SK IN / BR A CK E T S CR E W S G OING
T HR OUGH T HE D R AW ER F R ON T. SEE F IG.
4 .
6. Adjust the drawer skin/panel as needed. See fig. 5.
7. Tighten the drawer skin bracket screws.
NO T E: R EIN S TA L L A N Y D R AW ER F R ON T
SCR E W S R EMO V ED IN S T EP 5.
FIG. 3.
Drawer skin bracket screw location. Not all locations shown.
FIG. 5.
Bracket screw holes are slotted for easy adjustment. Screw
removed for illustration.
TEC_TM_120 REV. B
FIG. 1.
Drawer front bracket screw locations. Other side not shown.
FIG. 2.
Bracket screw holes are slotted for easy adjustment. Screw
removed for illustration.
FIG. 4.
Drawer front screw locations.
02/02/2022
A DA HE I GH T IN STA L L GUID E
Page 67 of 74
Advertisement
Table of Contents
