Cabinet Setup; Drawer Removal And Installation - True TRCB Series Installation Manual

Cabinet Setup

Drawer Removal and Installation #1

Removal
1. Completely open the drawer.
2. Locate the roller clips (in down position; see figs. 1 and 2).
3. While holding the sides of the drawer, rotate the roller clips
upward. See fig. 3.
4. Lift the drawer from the channel slot.
Installation
1. With the roller clips in the up position (see fig. 3), lower the
drawer's rear rollers into the channel slots.
2. Push the drawer into position.
3. Rotate the roller clips to the down position. See figs. 1 and 2.
Page 10 of 19
Chef Base Series
Fig. 1.
Roller clip location.
Fig. 2.
Roller clip in down position.
Fig. 3. Rotate the roller clip upward.
Fig. 4. Carefully lift the drawer from the channel slots.
07/6/2022
www.truemfg.com
TEC_TM_159 | REV. A | EN