Philips S91 Series Manual page 12

ENGLISH
12
3 Insert the lug of the beard styler attachment into the slot in the top
of the appliance. Then press down the beard styler attachment to
attach it to the appliance ('click').
You can use the beard styler attachment with the comb attached to style
length settings on the beard styler attachment correspond to the remaining
hair length after cutting and range from 1 to 5mm.
1 Slide the comb straight into the guiding grooves on both sides of the
beard styler attachment ('click').
2 Press the length selector and then push it to the left or right to
select the desired hair length setting.
3 Press the on/off button once to switch on the appliance.
4 You can now start styling your beard.
You can use the beard styler attachment without the comb to contour
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the centre to pull it off the beard styler attachment.
Do not pull at the sides of the comb.
2 Press the on/off button once to switch on the appliance.