Removing The Rear Wheel (Disc Brake); Disassembling The Rear Wheel; Checking The Rear Wheel; Checking The Rear Wheel Drive Hub - Yamaha TMAX XP500F 2015 Service Manual

EAS30156
REMOVING THE REAR WHEEL (DISC
BRAKE)
1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
TIP
Place the vehicle on the centerstand so that the
rear wheel is elevated.
2. Remove:
• Rear brake caliper "1"
• Rear brake lock caliper "2"
TIP
Do not apply the brake lever when removing the
brake caliper.
3. Loosen:
• Locknuts "1"
• Adjusting bolts "2"
(left side and right side)
4. Remove:
• Wheel axle nut "1"
• Washer
• Wheel axle "2"
• Rear brake caliper bracket
• Rear wheel
• Collars
TIP
Push the rear wheel forward and remove the
drive belt from the rear wheel pulley.
EAS30158

DISASSEMBLING THE REAR WHEEL

1. Remove:
• Oil seals
• Wheel bearings
Refer to "DISASSEMBLING THE FRONT
WHEEL" on page 4-25.
EAS30159

CHECKING THE REAR WHEEL

1. Check:
• Wheel axle
• Wheel bearings
• Oil seals
Refer to "CHECKING THE FRONT WHEEL"
on page 4-25.
2. Check:
• Tire
• Rear wheel
Damage/wear → Replace.
Refer to "CHECKING THE TIRES" on page
3-18 and "CHECKING THE WHEELS" on
page 3-18.
3. Measure:
• Radial wheel runout
• Lateral wheel runout
Refer to "CHECKING THE FRONT WHEEL"
on page 4-25.
EAS30160

CHECKING THE REAR WHEEL DRIVE HUB

1. Check:
• Rear wheel drive hub "1"
Cracks/damage → Replace the rear wheel.
4-35
REAR WHEEL