Advertisement
Available languages
Available languages
4 Adjusting the Throttle Cable
1
► Slide the control handle (1) along the tube to
the most comfortable position – distance
between nozzle outlet (2) and the control han‐
dle (1) must be at least 500 mm ('a').
1
► Secure the control handle (1) with the
screw (3).
► Secure the solution hose and throttle cable to
the 6th pleat (arrow) in the hose with the
retainer (4).
4
Adjusting the Throttle
Cable
It may be necessary to correct the adjustment of
the throttle cable after assembling the machine
or after a prolonged period of operation.
Adjust the throttle cable only when the unit is
completely and properly assembled.
0458-450-8721-C
a
2
3
4
► Set throttle trigger to the full throttle position –
as far as stop.
► Carefully rotate the screw in the throttle trigger
in the direction of the arrow until you feel initial
resistance. Then rotate it another full turn.
5
Harness
5.1
Adjusting the Harness
► Pull the ends of the straps downwards to
tighten the harness.
► Adjust the harness so that the backplate fits
snugly and securely against your back.
5.2
Loosening the Harness
► Lift the tabs of the sliding adjusters.
6
Fuel
The engine requires a mixture of gasoline and
engine oil.
English
35
Advertisement
Chapters
