Rear Panel Connections
Outside antenna
or
Cable TV coaxial cable
2-Way
signal
splitter
VCR
ANT
IN
V
STEREO SYSTEM
AMPLIFIER
NOTE
Cables are optional, except when specified.
TIPS ON REAR PANEL CONNECTIONS
♦
COMPONENT Y-PBPR (Input 1 & 2) or HDMI (1 & 2) connections are provided for high performance DVD players, VCRs etc. that have
this feature. Use these connections in place of the standard video connection if your device has this feature.
♦
If your device has only one audio output (mono sound), connect it to the left audio jack on (L/(MONO)) the Rear Panel.
♦
Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
♦
Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
♦
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV's PB input and the
components R-Y output to the TV's PR input.
♦
Your component outputs may be labeled Y-CBCR. In this case, connect the components CB output to the TV's PB input and the
components CR output to the TV's PR input.
♦
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs. (See page 33).
♦
When using a HDMI input from a Set-Top-Box, it is recommended to use a 1080p, 1080i or 720p input signal.
♦
When HDMI input a 1080p signal, it is recommended that the length of the cable should be less than 5 meters.
NOTES
•
Completely insert all connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back
will be abnormal if the connection is loose.
•
Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white to white, etc.
L
R
OPTICAL
IN
(IR OUT CABLE INCLUDED)
OUTPUT
OUTPUT
Y
P
/C
P
/C
L
R
Y
P
/C
P
/C
B
B
R
R
B
B
R
DVD PLAYER
HDTV SET-TOP BOX
HDMI
to
HDMI
OUTPUT CAPABILITY
DIGITAL OUTPUT
L
R
R
AUDIO OUT
DIGITAL
OUTPUT CAPABILITY
HDMI OUTPUT
HDMI DIGITAL
HDMI
to
DVI
15