Tips On Rear Panel Connections - Hitachi 42HDF52A Operating Manual

TIPS ON REAR PANEL CONNECTIONS

• S-VIDEO or Y-P P connections are provided for high performance laserdisc players etc. that have this feature. Use these connections
B R
in place of the standard video connection if your device has this feature.
• If your device has only one audio output (mono sound), connect it to the left(L) audio jack on the TV.
• Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
• Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
• COMPONENT: Y-P P connections are provided for high performance components, such as DVD players and set-top-boxes. Use
B R
these connections in place of the standard video connection if your device has this feature.
• Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV's P
the components R-Y output to the TV's P
• Your component outputs may be labeled Y- C
components C output to the TV's P
R
• It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-P
• To ensure no copyright infringement, the TV VIDEO OUT output will be abnormal, when using the Y-P
• When using a DVI input from a Set-Top-Box, it is recommended to use a 1080i or 720p input signal.
input.
R
C . In this case, connect the components C
B R
input.
R
output to the TV's P
B
P inputs.
B R
23
input and
B
input and the
B
P , RGB and DVI input jacks.
B R