Table of Contents
Advertisement
5.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
I II
Z97-C
Z97-C Front panel audio connector
6.
Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
I II
Z97-C
Z97-C Serial port (COM) connector
The COM module is purchased separately.
1-18
AAFP
connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97].
PIN 1
HD-audio-compliant
Legacy AC'97
pin definition
compliant definition
COM
PIN 1
Chapter 1: Product introduction
Advertisement
Table of Contents
