Garmin GTN 725 Cockpit Reference Manual page 90

All manuals and user guides at all-guides.com
Message
MARK ON
Mark on target
waypoint creation
TARGET -
has failed because of
Waypoint creation
missing GPS position.
has failed. MOT
requires GPS
position.
NAV ANGLE -
NAV angle is set to
User.
NAV Angles are
referenced to a
User set value (U).
NAV ANGLE -
NAV angle is set to True. No action is necessary; message is
NAV Angles are
referenced to True
North (T).
NON-WGS84
The active waypoint is not
referenced to the WGS84
WAYPOINT -
datum. See Note 1 at the
See CRG. Location
end of this table.
may be different
than where
surveyed for [WPT].
OBS -
OBS requires an active
waypoint and is not
OBS is not
supported in dead
available due to
reckoning mode.
dead reckoning or
no active waypoint.
PARALLEL TRACK -
Parallel track is not
supported on current
Parallel track not
leg type.
supported for leg
type.
PARALLEL TRACK -
Parallel track is not
supported for turns
Parallel track not
greater than
supported for turns
120 degrees due to the
greater than
acute angle.
120 degrees.
80
Description
Wait for GPS satellite geometry to
improve. Ensure the aircraft has a
clear view of the sky. Reattempt
waypoint creation. Contact dealer
for service.
No action is necessary; message is
informational only.
informational only.
No action is necessary; message is
informational only.
No action is necessary; message is
informational only.
No action is necessary; message is
informational only.
No action is necessary; message is
informational only.
GTN 725/750 Cockpit Reference Guide
Action
190-01007-04 Rev. K