Advertisement
Quick Links
20 Ft. 8-1/2" x 20 Ft. 6"
two car canopy
Set up and operating inStructionS
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SaVe thiS manual.
©
Copyright
2005 by Harbor Freight Tools
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09k
92942
®
. All rights reserved. No portion of this manual or any
Advertisement
Related Manuals for Harbor Freight Tools BIG TOP 92942
Summary of Contents for Harbor Freight Tools BIG TOP 92942
- Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
-
Page 2: Important Safety Information
SaVe thiS manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). -
Page 3: Specifications
Maintain labels and nameplates on Canopy. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Do not use Canopy for any purpose other than for what it was intended. -
Page 4: Safety Information
aSSemBly diagramS and inStructionS read the entire important SaFety inFormation section at the beginning of this manual including all text under subheadings therein before set up or use of this product. all partS Below reFer to the partS liSt Shown on page 6. - Page 5 framing Tubes as shown in Figures C and D, bottom. Once the corners are fastened, attach the remaining Tarp Ties through the rest of the metal eyelets and onto the framing Tubes. Lift one side of the roof and insert three Vertical Tubes (part #1) into the 3-Way End Pieces and 4-Way Center Figure B...
-
Page 6: User Maintenance Instructions
uSer-maintenance inStructionS Procedures not specifically explained in this manual must be performed only by a qualified technician. to preVent SeriouS injury From accidental operation: do not use damaged equipment. if the canopy or one of its assembly parts is damaged, have the problem corrected before further use.