Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
10 ft. x 17 ft.
Portable Garage
Vehicle not included.
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 69039
Advertisement
Related Manuals for Harbor Freight Tools 69039
Summary of Contents for Harbor Freight Tools 69039
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Table Of Contents
Addresses practices not related to personal injury. WARNING marking concerning Risk Double Insulated of Eye Injury. Wear ANSI-approved safety goggles with side shields. Canadian Standards Association Read the manual before set-up and/or use. Underwriters Laboratories, Inc. Page 2 For technical questions, please call 1-800-444-3353. Item 69039... -
Page 3: Safety
7. Maintain product labels and nameplates. children to play with or near this item. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. SAVE THESE INSTRUCTIONS. Item 69039 For technical questions, please call 1-800-444-3353. -
Page 4: Specifications
Specifications Overall Dimensions 10′ W x 17′ L x 9′ 3″ H Center Height 9′ 3″ Side Height 6′ 3″ Pole Tubing Diameter 1.27″ Page 4 For technical questions, please call 1-800-444-3353. Item 69039... -
Page 5: Assembly
Parts List and Diagram on page 14. TO PREVENT SERIOUS INJURY: Do not leave this product partially assembled. Assemble this product completely at one time. Figure A: Frame Assembly Overview Item 69039 For technical questions, please call 1-800-444-3353. Page 5... - Page 6 Connectors are angled down, as shown. Figure C: Ridge Assembly 2. Connect a Rafter (2) to each free end of every Connector (6-1, 5-1), as shown. Figure D: Rafter Assembly Page 6 For technical questions, please call 1-800-444-3353. Item 69039...
- Page 7 Pin, and spread end open. of the Center Stud (1-1). Figure G: Corner Leg Assembly 2. Assemble a Corner Leg (23) to the bottom of each Corner Stud (1-2) as shown. Item 69039 For technical questions, please call 1-800-444-3353. Page 7...
- Page 8 Figure I: Studs Installed on Both Sides 5. Make sure all parts assembled up to this point are firmly joined together. Tap parts together gently with a rubber mallet (sold separately) if needed. Page 8 For technical questions, please call 1-800-444-3353. Item 69039...
- Page 9 Cable Clamp (14-3). Tighten the two nuts on the Cable Clamp (14-3) evenly to secure the Cable (14-2). d. Repeat for all four Anchors (14-1) and Corner Legs (23). Item 69039 For technical questions, please call 1-800-444-3353. Page 9...
- Page 10 Covers, and Corner Legs. Figure N: Tightening Ratchet Releasing Ratchet Tie-downs (22) 1. Depress the spring-loaded bar on the handle. 2. Open ratchet handle completely. 3. Unwind the strap. Figure O: Releasing Ratchet Page 10 For technical questions, please call 1-800-444-3353. Item 69039...
- Page 11 Securing Ratchet Tie-downs (22) on page 10 and Figure Q. 5. Repeat steps #1 – 4 above to install the Back Cover (20) to the other end of the Portable Garage. Item 69039 For technical questions, please call 1-800-444-3353.
- Page 12 7. Make sure that all the bottom cross rails are of the same height from the ground, then tighten all Nuts (12). 8. Secure the four corners to the Corner Legs (23) using Ratchet Tie-downs (22), see Securing Ratchet Tie-downs (22) on page 10. Page 12 For technical questions, please call 1-800-444-3353. Item 69039...
-
Page 13: Maintenance
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 69039 For technical questions, please call 1-800-444-3353. Page 13... -
Page 14: Parts List And Diagram
Connector B 4-Way Ridge Door Cover Connector 4-Way Side Connector Back Cover 4-Way Center Rope (24′) (7.3M) Rail Clamp 3-Way End Ratchet Tie-down Rail Clamp Foot Corner Leg M6×45 Bolt Page 14 For technical questions, please call 1-800-444-3353. Item 69039... -
Page 15: Assembly Diagram
Assembly Diagram Item 69039 For technical questions, please call 1-800-444-3353. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.