Download Print this page

C Onnect I Nput S Ource; Data Transfer - Optoma Pico PK102 Manual

Pocket projector
Hide thumbs Also See for Pico PK102:

Advertisement

C
B
hargIng the
attery
1. Remove protection cap and insert
1
the plug. (  ~  )
2
2. Connect the charger. (  ~  )
3. During charging the LED indicator
lights red. (  )
4. The LED Charge Indicator will go off
when battery is fully charged. This
process may take up to 2.5 hours
3
<Note>
1. For more LED indicator, see page 7.
2. The indicator will flash red when no
battery is installed.
4
5
<Optional>
The PK102 can also be charged via USB to
DC cable (  )
c
i
s
- (vga/uSB/c
onnect
nput
ource
1. Connect the VGA/USB/
Component source device.
1
<Note> Supported formats
VGA: 640x480@60Hz, 800x600@60Hz
2
or
<Note> Supported Files
Photos: bmp, jpeg
Video: M-JPEG, MPEG4, RMVB, RM, WMV,
Xvid, Mov by Optoma Video encoder
<Note>
USB device: Support USB Flash Drive up to
1
5V/150mA, but does not support USB Hard
2
Disk Drive
or
<Note> Supported formats
Component input resolution must be 480i/p
1
2
4
c
onnect
All manuals and user guides at all-guides.com
Projector will not charge while
operating.
2
2
c
)
omponent In
onnect
Insert universal connector
with arrow mark facing up.
i
s
- (v
nput
ource
IDeo In
1. Connect the AV input source.
(  ~  )
2. Connect to external speaker using
AVII cable (optional) and use the
toggle to disable/enable the PK102
1
internal speaker (  )
<Note>
1. All other brand and product names are
2
trademarks or registered trademarks of their
respective companies.
2. The connecting cable of video output
or
device is not supplied, please contact their
service center.
3. iPod nano/iPod touch/iPhone/iPod classic
(version 5 and above)
1
4. Designed for iPod/iPhone/Mobile phone/
PMP with TV out functions. Using with
device with audio signal voltage > 0.3Vrms
is not recommended.
or
1
iPod
1
2
i
s
D
nput
ource
ata tranSfer
1. Connect laptop or PC for data
transfer to the PK102 internal
memory using supplied Male USB
Cable
1
<Note> The laptop/PC can only detect
the input source when the PK102 is switched
on. This should stop the projection at the mean
time.
2
)
or

Advertisement

loading