Safety Notices - Optoma Pico PK102 Manual

I
mportant
1. Do not block any ventilation openings.
CLASS 1 LED PRODUCT
To ensure reliable operation of the
projector and to protect from over
heating, it is recommended to install
the projector in a location that does not
e S W block ventilation. As an example, do not
ye afety arnIngS
place the projector on a crowded coffee
table, sofa, bed, etc. Do not put the
Avoid staring/facing directly into
projector in an enclosure such as a book
the projector beam at all times.
case or a cabinet that restricts air flow.
Keep your back to the beam as
2. Do not use the projector near water or
much as possible.
moisture. To reduce the risk of fire and/
A stick or laser pointer is
or electric shock, do not expose the
recommended to avoid the need
projector to rain or moisture.
for the user to enter the beam.
3. Do not install near heat sources such as
radiators, heaters, stoves or any other
When projector is used in a
apparatus such as amplifiers that emits
classroom, adequately supervise
heat.
students when they are asked to
4. Do not use the projector in direct
point out something on the screen.
sunlight.
In order to minimize power, use
5. Do not use near any appliance
room blinds to reduce ambient
generating a strong magnetic field.
light levels.
6. Do not use the projector in areas
susceptible to excessive dust and dirt.
7. Turn off the product before cleaning.
8. Turn off the product before removing
the battery.
9. Disconnect the battery if the product is
not being used for a long period of time.
10. Ensure that the ambient room
temperature is within 5- 35°C.
11. Relative Humidity is 5 - 35°C, 80%
(Max.), non-condensing.
12. Do not expose the battery to
temperatures above +60°C (+140°F)
13. New or idle batteries can have short-
term reduced capacity. Fully charge the
battery before initial use.
14. Do not put the battery into your mouth.
15. Do not let the battery contacts touch
another metal object.
16. Do not drop, throw or try to bend your
product.
17. May explode if disposed of in fire.
18. Clean only with dry cloth.
r &
egulatIon

Safety notIceS

This appendix lists the general notices of Notice: Shielded cables
your Projector. All connections to other computing
devices must be made using shielded
FCC notice
cables to maintain compliance with
This device has been tested and found to
FCC regulations.
comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Caution
Changes or modifications not
rules. These limits are designed to provide
expressly approved by the manufac-
reasonable protection against harmful
turer could void the user's authority,
interference in a residential installation.
which is granted by the Federal
This device generates, uses, and can radiate
Communications Commission, to
radio frequency energy and, if not installed
operate this device.
and used in accordance with the instruc-
tions, may cause harmful interference to
Operation conditions
radio communications.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
However, there is no guarantee that inter-
lowing two conditions:
ference will not occur in a particular instal-
lation. If this device does cause harmful
interference to radio or television reception,
which can be determined by turning the
device off and on, the user is encouraged
Notice: Canadian users
to try to correct the interference by one or
This Class B digital apparatus complies with Canadian
more of the following measures:
ICES-003.
• Reorient or relocate the receiving
Remarque à l'intention des utilisateurs canadiens
antenna.
Cet appareil numerique de la classe B est conforme a la
• Increase the separation between the
norme NMB-003 du Canada.
device and receiver.
• Connect the device into an outlet on
Declaration of Conformity for EU countries
a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/television technician for help.
2
S I
afety nStructIon
All manuals and user guides at all-guides.com
19. Only use attachments/accessories
specified by the manufacturer.
20. Do not use the unit if it has been
physically damaged or abused. Physical
damage/abuse would be (but not
limited to):
▀■ Unit has been dropped.
▀■ Charger or plug has been damaged.
▀■ Liquid has been spilled on to the
projector.
▀■ Projector has been exposed to rain or
moisture.
▀■ Something has fallen in the projector
or something is loose inside.
Do not attempt to service the unit
yourself. Opening or removing covers
may expose you to dangerous voltages
or other hazards. Please contact your
local reseller or service center before you
send the unit for repair.
21. Do not let objects or liquids enter the
projector. They may touch dangerous
voltage points and short out parts that
could result in fire or electric shock.
22. See projector enclosure for safety related
markings.
23. The unit should only be repaired by
appropriate service personnel.
24. Do not touch the projector for a long
time while the projector is used.
25. CAUTION: Risk of Explosion if Battery
is replaced by an Incorrect Type.
26. Dispose of Used Batteries According to
the Instructions.
D
ISpoSal of olD
trIcal
e
quIpment
(Applicable throughout the European
Union and other European countries
with separate collection programs)
This symbol found on your product or on
its packaging, indicates that this product
should not be treated as household waste
when you wish to dispose of it. Instead,
it should be handed over to an applicable
collection point for the recycling of electri-
cal and electronic equipment. By ensuring
this product is disposed of correctly, you
will help prevent potential negative con-
sequences to the environment and human
1. this device may not cause harmful
health, which could otherwise be caused by
interference, and
2. this device must accept any interfer-
inappropriate disposal of this product. The
ence received, including interference
recycling of materials will help to conserve
that may cause undesired operation.
natural resources.
• EMC Directive 2004/108/EC (including
amendments)
• Low Voltage Directive 2006/95/EC
• R & TTE Directive 1999/5/EC (if product has
RF function)
e -
lec
& e
lectronIc
This symbol is only
valid in the European
Union.
If you wish to discard
this product, please
contact your local
authorities or dealer
and ask for the correct
method of disposal.