Q: Manual Flash - Canon MACRO TWIN LITE MT-26EX-RT Basic Operation Manual

q: Manual FlashN
You can set the flash output in the range of 1/1 full output to 1/512
power in 1/3-step increments. You can take pictures using three
methods: firing with both flash heads A and B at the same flash output,
firing with both flash heads A and B at different flash outputs, and
single-side (A or B only) firing.
Setting the camera's shooting mode to <f> or <a> is
recommended. Additionally, take a test shot first to check the exposure.
Firing with Both Flash Heads A and B at the Same Flash
Output
If high-speed sync is set, the setting range will be 1/1 - 1/64.
The guide number will differ between both-sides firing and single-side
firing even when the flash output settings are the same.
24
Set the flash mode to <q>.
1
Press the <E> button.
Turn <9>, select <R>, then
press <8>.
Turn off the <,> display.
2
Press the <,> button.
Turn <9>, select <M>, then
press <8>.
Set the flash output.
3
Press function button 2 <@> or
<8>.
The flash output level is highlighted.
Turn <9> to set the flash output,
then press <8>.