Q: Wireless Multiple Flash Shooting With Manual Flash Output - Canon Macro ring lite MR-14EX II Instruction Manual

q: Wireless Multiple Flash Shooting with
Manual Flash Output
This section describes wireless multiple flash shooting using manual
flash. You can shoot with a different flash output setting for each firing
group. Set all the parameters on the master unit.
When C.Fn-15 is set to 0 (p.63), check that <]> and
<4> <5> <6> are displayed. You can perform
wireless multiple flash shooting with slave C added.
When C.Fn-15 is set to 1 (p.63), press the <,> button and
select the flash method from the options below. You can perform
wireless multiple flash shooting with slave A, B, and C added.
• <_> and <j>
• <%> and <4> <5>
• <]> and <4> <5> <6>
1 Set the flash mode to <q>.
Press the <E> button and set to
<q>.
2
Set the firing group.
Press the <,> button to display
<:> (optical transmission wireless)
M
and <
3
Select a firing group.
When you selected <4>
<5> or <4> <5>
<6> in step 2, press function
button 3 <F> or <8> and turn
<9> to select the group you want to
set the flash output for.
>.
55