Haier TFT-LCD Owner's Manual page 22

Watching TV Program continued
Watching TV program
If the color of some channel is abnormal
Usually this should be set in the
auto position. However if the color
displayed on the screen are incorrect,
you can manually select the correct
color system.
Press the menu and VOL+/- button,
till the picture menu shown on the
right will display on the screen.
If picture color is abnormal
Press the CH+/- buttons to select "color sys.", then press the
VOL-/+ buttons to select the correct color system. In general,
you can set it as "AUTO".
If sound is abnormal
Press the CH+/- buttons to select "sound sys.", then press the
VOL-/+ buttons to select the correct sound system. In general,
you can set it as " D/K"
Skip
After the programs are presetting, you can skip some
programs so that to select your favorite channels only.
1. Press CH+/- button or Direct-digit
choosing button to select a channel
directly (take channel 18 for
example).
2. Press MENU CH+/-and VOL+/-
button, till the TUN. menu shown
on the right will display on the
screen.
3. press VOL-/+ button to set Skip On.
4. press MENU exit.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number
of the channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set Skip OFF.
Color Sys.
Sound Sys.
Manual Search
Store Program
Fine Tune
Skip
Auto Search
Prog. Switch
.
Auto
D/K
---
49.75MHz
Off
A
B
C
Color Sys. Auto
Sound Sys. D/K
Manual Search
Store Program ---
Fine Tune 49.75MHz
Skip Off
Auto Search
Prog. Switch
A
B
C
19