Table of Contents
Advertisement
WORK
3 W ORK
Removing the seat
3.1
Mounting the seat
3.2
Reinstalling the fuel tank
3.3
Positioning the fuel tank
3.4
–
Insert the ignition key in the seat lock
–
Lift up the seat at the rear, pull it back and remove from above.
700131-01
–
Suspend the seat on the screw
push it forwards. The two projections
–
Push the locking pin
until the locking pin locks in place with an audible click.
–
Remove the ignition key from the seat lock.
–
Finally, check that the seat is correctly mounted.
700199-01
–
Remove the seat. (
–
Remove screw
Info
The fuel lines do not need to be disconnected.
700159-01
–
Lay a cloth
–
Carefully raise the fuel tank and move it backwards.
–
Place the fuel tank on the vehicle so that the left spoiler is still lying on the com-
pensating tank
tank and the spoiler to prevent damage.
700160-10
–
Remove the cloth
700160-11
, press the rear downwards and at the same time
into the lock housing and push the back of the seat down
S. 5)
.
over the subframe and straighten the steering.
(see illustration). Place a cloth
from between the compensating tank and the spoiler.
and turn it 45° counterclockwise.
must be inserted into the frame.
between the compensating
5
Advertisement
Table of Contents
