Introduction; Manual Accuracy; Contact Info; Functional Overview - Grizzly G0689 Owner's Manual

Manual Accuracy

We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings, and
photographs of the machine we used when writ-
ing this manual. however, sometimes errors do
happen and we apologize for them.
also, owing to our policy of continuous improve-
ment, your machine may not exactly match
the manual. if you find this to be the case, and
the difference between the manual and machine
leaves you in doubt, immediately call our techni-
cal support for updates or clarification.
For your convenience, we always keep current
grizzly manuals and most updates available on
our website at www.grizzly.com. any updates to
your machine will be reflected in these documents
as soon as they are complete. Visit our site often
to check for the latest updates!

Contact Info

We stand behind our machines. if you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pa 17756
phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
if you have any comments regarding this manual,
please write to us at the address below:
grizzly industrial, inc.
/ technical documentation Manager
C
o
p.o. Box 2069
Bellingham, Wa 98227-2069
Email: manuals@grizzly.com
-2-

INTRODUCTION

functional Overview

the Model g0689 planer allows the user to plane
material from the surface of boards in precise
increments. the depth-of-cut is adjusted with the
cutterhead elevation crank and is measured by
the cutterhead elevation scale or the depth-of-cut
gauge. one turn of the crank raises or lowers the
cutterhead ⁄ ".
1
16
once the depth-of-cut is adjusted, the operator
feeds the board into the infeed roller which pulls
the board into the cutterhead, where material is
removed. the outfeed roller then pulls the board
away from the cutterhead. after the board is
completely free from the outfeed roller, it can be
returned to the infeed side of the machine. larger
workpieces can be passed across the return roll-
ers on top of the machine.
the depth-of-cut is again adjusted, and the pro-
cess is continued until the desired board thick-
ness is reached.
g0689 13" planer