Advertisement
INSTALLATION OF CO
Instructions
Applicable Models: RHF035EE/RHF050EE/RHF080EE/RHF100EE,
AN035/050/080/100JSKLKN
1) Turn off the power and
disconnect the product from
power supply.
It is not necessary to disassemble
the product to replace or clean
the fan, motor, heat exchange
unit, or dust filter.
2) Unscrew the two bolts from
the maintenance cover and
disengage them from the hook.
After disengaging the maintenance
cover, check 2 heat exchange units
and 2 dust filters.
All work should be carried out
through the maintenance opening
from this point.
3) Disengage the heat exchange
units and dust filters from the
product.
Make sure to disengage the
filters first.
Both heat exchange units should
be disengaged from the product.
4) Unscrew the bolt and
disengage the heat exchange
unit guide on the right side from
the product.
SENSOR
(Continued)
2
Front
Heat Exchange Unit
7
Top
Bolt
Dust Filter
Heat Exchange Unit
Bolt
Back
Advertisement
