Operations And Adjustments; Buckle; Harness Tie; Adjustable Handle - Graco 41413ZOL Instruction Manual

OPERATIONS and ADJUSTMENTS

1

Buckle:

3-Point Models
• To buckle: Push tongue down into slot.
Pull up on tongue to be sure it is locked.
• To unbuckle: Press red button and pull
tongue out.
5-Point Models
• To buckle: Insert both tongues into
buckle. Pull up on tongues to be sure
they are locked.
• To unbuckle: Press red button and pull
tongues out.
2
2-Piece Harness Tie:
• To open: Squeeze tabs and pull apart.
• To close: Snap halves together. Make
sure harness tie is locked by pulling out
on each half.
12
3

Adjustable Handle:

• Handle has three adjustment positions.
• Push in red buttons on each side of
handle, rotate and release red buttons.
Continue rotating handle to desired
position until you hear a "click" sound.
• IMPORTANT: Before lifting car seat, place
handle in "locked" upright carrying
position.
4

Removing Car Seat from Base:

• Place handle in "locked" upright carrying
position.
• Pull red release handle in base (fig. a).
• Lift car seat out of base.
5

Adjustable Base:

• Pull Level Adjuster Handle out (fig. b).
• Adjust Foot to desired position.
• Release adjustment handle. Be sure it
retracts into slot.