Table of Contents
Advertisement
INSTALLATION
1
Place car seat
rear-facing
(Refer to illustration on Page 9)
2
Thread vehicle lap belt through car seat Slots
and buckle belt.
NOTE: Vehicle shoulder belt must NOT be
placed through car seat Slots.
Press down firmly on car seat to compress
3
vehicle seat cushion while tightening vehicle
lap belt (fig. a).
Pull front to back and left to right to check for
4
secure installation (fig. b). Vehicle lap belt
MUST stay tight.
If not secure, see "Vehicle Seat Belts" section.
5
Check level indicator on car seat.
Ball MUST be entirely in green zone (fig. c). If
necessary place rolled Towels under car seat
at vehicle seat crease.
NOTE: Vehicle must be on level ground and
child in car seat when leveling.
8
WITHOUT
on vehicle seat.
BASE
6
Adjust handle to a position behind car seat.
Advertisement
Table of Contents
