Outline From Unpacking To Operation Of Robot System - Epson RT3B-401SS Safety Manual

Outline from Unpacking to Operation of Robot System

This section describes outline from unpacking to operation of robot system.
1. Unpacking
2. Transportation
3. Installation
4. Power-on
5. Settings of EPSON RC+ 7.0
6. Connection and settings of peripherals and options
Refer to the following PDF manuals for the details of 1 to 6 from your robot system.
RC700 series Manual (RC700, RC700-A)
RC700-D Manual
RC90 series Manual
T series Manual
T-B series Manual
VT series Manual
For how to read the manual, refer to the following.
When an error occurs, pay attention to the followings.
NOTE
The error number displayed on the Controller or teach pendant can be a tip to find

the cause of the abnormality. When an error occurs, be sure to write down the error
number and reset the error by referring to "Status Code / Error Code List".
NOTE

When an abnormality is caused by our robot system and exceeds the range that the
customer can handle, please contact our service department (supplier).
Safety Manual Rev.4
Outline from Unpacking to Operation of Robot System
(First Step - For the first)
(Second Step – For the next)
This manual "The Manuals of This Product"
65